Lowtemp Plates 2-Zone PID Rosin Press Controller

This device is the first I’ve built in a more professional setting, outside of class and personal interest.  The device is a two-zone PID heat controller for rosin presses.

The device uses two optically isolated TRIACs to control two independent heating elements, with feedback from K-type thermocouples.  The heating element assembly is plugged into the device with a 5 pin XLR-type connector typically found in the industry.

After being approached with an initial device concept and bill of materials, I was able to fit the system into an enclosure, develop a user interface, and prepare the device for production.

Shown on the right is the completed production model of the device, consisting of three main parts: the circuit board, injection-molded plastic enclosure, and XLR heating element assemblies.  The design documentation and preparation of each of these components was all supervised by me over a period of about 9 months.

This device has been available as a component for Lowtemp Plates brand rosin presses.  It can be found here: https://www.lowtemp-plates.com/products/lt2-heat-controller

I want to take a moment to mention that this device isn’t perfect and several issues have been encountered with it (notably, electrical noise disrupting the heating cycle). Nevertheless, its production showcases some of my exploration in the field of systems engineering.

If you have questions, please feel free to reach out.  ryan@ryanmsparks.com